Sold in pairs Speaker and ring mounting hardware Included!
Front Mount Adapter Rings
Rear Mount Adapter Rings
Rear CNC molded sub mount adapter , OD 8.625 mounting 7.125 Set back ½” Slight variances of 1-3%. I took all the guess work out of it for you! These sit up front and allow either a midbass or a sub to be mounted.
Fitment will also vary by bag manufacture. Using a Quality bag or stock bag will achieve the best results.
Recommend to predrill prior to installing but not necessary.
It is recommended but not necessary to use a 2 part epoxy to bond the adapter to the saddle bag. A good example would be 3M 08115. You should also have some knowledge of body work as you will be cutting the saddle bag.
**due to many variations of saddle bags these were CNC using stock bags. Depending on the bag slight modifications may have to be done to the adapter. I.E sanding to the mounting face of the adapter or use of silicon caulk to fill in small gaps. Using a quality aftermarket or stock bag will achieve the easiest and best results.