10" JL TW-3 Adapters (Pair) All years 98-current

10" JL TW-3 ADAPTERS

Sold in pairs Speaker and ring mounting hardware Included!

CNC molded 10” JL subwoofer adapter. This adapter has a setback larger than the 10” Subs  and a 5* angle to clear excursion of the speaker to ensure it doesn’t hit the shock at the top with a ½” mounting surface.  With the ever growing demand to add subs to your bag this is a perfect solution to add some nice shallow mount subs, and seal the top. The inside diameter may have to be opened slightly. This can be achieved by slightly sanding the mounting part of the adapter. Fitment will also vary by bag manufacture.  Using a Quality bag or stock bag will achieve the best results. All new designs 

MUST BE PREDRILLED PRIOR TO USING SCREWS. DO NOT USE SELF TAPPING SCREWS

 Threaded Inserts for speakers ( 16 ) 10-24 Stainless steel hardware, 16 stainless steel outer ring hardware. Drill bit and tool to put in inserts. Panel bond not included. 

It is recommended but not necessary to use a 2 part epoxy to bond the adapter to the saddle bag. A good example would be 3M 08115. You should also have some knowledge of body work as you will be cutting the saddle bag.
**due to many variations of saddle bags these were CNC using stock bags. Depending on the bag slight modifications may have to be done to the adapter. I.E sanding to the mounting face of the adapter or use of silicon caulk to fill in small gaps. Using a quality aftermarket or stock bag will achieve the easiest and best results.

Custom Made Parts, all sales are Final

Sold in pairs